Treatment of Wear

As an essential component of transmission products such as screw elevators, the stability of hard tooth surface reducers plays an important role in the entire transmission system. But if a hard toothed reducer with hardness that does not meet the requirements is purchased during the purchasing process, or if the service life is too long, or if it is overloaded, it will accelerate the wear of the hard toothed gear, thereby affecting the normal operation of the transmission system.

1.The main manifestations of malfunctions after prolonged use are:
Vibration and noise increase during use. The main reason for this phenomenon is that the internal components of the chassis are worn out or damaged.

2.Possible damaged parts: gear tooth surface wear, gear tooth breakage, gear shaft hole or keyway wear; The screw holes at the bearing holes are prone to failure due to wear and tear; The shaft surface and keyway are also prone to wear due to prolonged use.

3.Repair method: Not all repair shops have the technical strength to repair according to this method, but for large equipment, being able to find repair points to repair components will greatly save the overall cost of the enterprise.

① If it is due to wear on the shaft surface, shaft hole, keyway, etc. of the hard tooth reducer, electroplating can be used to restore the original accuracy of the parts.

②If the gear teeth of the hard tooth reducer are broken or damaged, the only solution is to reprocess new parts. In order to ensure the service life of the hard tooth surface reducer, customers must choose the right type when purchasing the hard tooth surface reducer, ensure the safety factor of the hard tooth surface reducer, and strictly follow the instructions to operate, in order to maximize the effectiveness of the hard tooth surface reducer.