0102030405
High Efficiency ZGY Shaft-Mounted Cylindrical Gear Reducer from China Suppliers and Factory for Diverse Industries
⚙️ Product Features
- 1 The gears are made of high-strength low-carbon alloy steel and are processed through carburizing, quenching and grinding.
- 2 The gears have high precision and high hardness. They feature a small size, light weight, large bearing capacity, high efficiency, simple structure, and convenient installation and maintenance.
- 3 An anti-reverse rotation device can be configured. The input shaft of the reducer is connected to the motor through a pulley, and the output uses a hollow shaft with a single key connection, which can be directly hung on the main shaft of the machine.
📋 Conditions of Use
- 1 The maximum speed of the input shaft of the reducer shall not exceed 1400 r/min.
- 2 The peripheral speed of the gear shall not exceed 10 m/s.
- 3 Working environment: -40 to 45℃. If the temperature is below 0℃, the lubricating oil should be preheated to above 0℃ before starting. This reducer can be used for operation in both forward and reverse directions.
🔧 Installation and Use of Reducer
- 1 The high-speed shaft should not be directly hammered when cooperating with other parts.
- 2 After installing the reducer, rotate it by hand. Must be flexible and unobstructed.
- 3 Run without load for 2 hours. If any abnormal noise, overheating, or oil leakage is found, please stop running immediately.
- 4 When installing the torque arm, try to make the torque arm perpendicular to the fixed point and the output shaft line. The deviation should be ±10 degrees, and the torque arm should be in a tensile stress state.
🛢️ Lubrication of the Reducer
- 1 For this reducer, the recommended lubricant is L-CKC150 medium-load extreme pressure gear oil. When using a reverse gear device, no lubricating additives such as graphite or molybdenum disulfide should be used in the reducer.
- 2 After the first oil change, after 200 hours of operation, a new oil should be replaced. For subsequent continuous operation, the oil should be changed every six months or every 2500 hours of operation.
🖼️ Detail Pictures
❓ Frequently Asked Questions
Q
What material are the gears made of in this reducer?
The gears are made of high-strength low-carbon alloy steel and are processed through carburizing, quenching, and grinding to ensure high precision and high hardness.
Q
What is the maximum input shaft speed allowed for this reducer?
The maximum speed of the input shaft shall not exceed 1400 r/min, and the peripheral speed of the gear shall not exceed 10 m/s.
Q
Can this reducer be used in cold environments?
Yes. The working environment range is -40 to 45℃. However, if the ambient temperature is below 0℃, the lubricating oil must be preheated to above 0℃ before starting the reducer.
Q
What lubricant is recommended for this reducer?
The recommended lubricant is L-CKC150 medium-load extreme pressure gear oil. Additives such as graphite or molybdenum disulfide should not be used, especially when a reverse gear device is installed.
Q
How often should the lubricating oil be changed?
After the initial 200 hours of operation, the oil should be replaced for the first time. Subsequently, the oil should be changed every six months or every 2500 hours of continuous operation, whichever comes first.
Q
What should I check after installing the reducer?
After installation, rotate the reducer by hand to confirm it moves flexibly and without obstruction. Then run it without load for 2 hours and monitor for any abnormal noise, overheating, or oil leakage. If any issues are found, stop operation immediately for inspection.