0102030405
High-Efficiency Wear-Resistant Anti-Slip Nylon Conveyor Belt - Trusted China Suppliers & Factory
Application of Conveyor Belts
Anti-oil Conveyor Belts
Anti-slip Conveyor Belts
Climbing Conveyor Belts
Anti-corrosion Conveyor Belts
High-temperature-resistant Conveyor Belts
Flame-retardant Conveyor Belts
Strength Standard of Conveyor Belt
General Conveyor Belt Overlay
Tensile strength shall be no less than 15 MPa, and elongation at break shall be no less than 350%; Interlayer bonding strength of the longitudinal specimens shall be on average no less than 3.2 N/mm for the fabric layer; Interlayer bonding strength between the overlay rubber and the fabric shall be no less than 2.1 N/mm; longitudinal elongation at break of the full thickness shall be no less than 10%; longitudinal reference force elongation of the full thickness shall be no more than 1.5%.
Overlay for Nylon (NN) and Polyester (EP) Conveyor Belts
Tensile strength shall be no less than 15 MPa, and elongation at break shall be no less than 350%; Average interlayer bonding strength of the longitudinal specimens shall be no less than 4.5 N/mm for the fabric layer; Interlayer bonding strength between the overlay rubber and the fabric shall be no less than 3.2 N/mm; longitudinal elongation at break of the full thickness shall be no less than 10%; longitudinal reference force elongation of the full thickness shall be no more than 4%.
Notes for Attention
With the widespread use of conveyor belts in industrial production, several aspects are of concern to purchasers, including multi-variety, high performance, lightweight, multi-functionality, and long lifespan. In industrial production, the correct use of conveyor belts is particularly important. When using conveyor belts, the following points should be noted:
1
Avoid the idlers being covered by materials, causing poor rotation and preventing materials from getting stuck between the drum and the conveyor belt. Pay attention to lubricating the movable parts of the conveyor belt, but do not apply oil to the conveyor belt itself.
2
Prevent the conveyor belt from being started under load.
3
If the conveyor belt deviates, take measures promptly to correct it.
4
When a local part of the conveyor belt is damaged, use artificial cotton to repair it in time to avoid further damage.
5
Avoid the conveyor belt being blocked by the frame, pillars, or blocky materials, and prevent it from being punctured or torn.
Detail Pictures
Frequently Asked Questions (FAQ)
Q What are the main types of conveyor belts available?
There are many types of conveyor belts designed for specific industrial needs, including anti-oil conveyor belts, anti-slip conveyor belts, climbing conveyor belts, anti-corrosion conveyor belts, high-temperature-resistant conveyor belts, and flame-retardant conveyor belts. Each type is engineered to perform reliably under particular working conditions.
Q What is the minimum tensile strength required for a general conveyor belt overlay?
For a general conveyor belt overlay, the tensile strength shall be no less than 15 MPa, and the elongation at break shall be no less than 350%. These standards ensure the belt can withstand the mechanical stresses of regular industrial operations.
Q How do Nylon (NN) and Polyester (EP) conveyor belts differ in bonding strength standards?
For Nylon (NN) and Polyester (EP) conveyor belts, the average interlayer bonding strength of longitudinal specimens shall be no less than 4.5 N/mm for the fabric layer, and no less than 3.2 N/mm between the overlay rubber and the fabric. These values are higher than those for general conveyor belts, reflecting the enhanced performance requirements of these materials.
Q How should a conveyor belt be started to avoid damage?
A conveyor belt should never be started under load. Starting under load puts excessive stress on both the belt and the drive system, which can lead to premature wear, slippage, or even mechanical failure. Always ensure the belt is unloaded before starting.
Q What should be done if a conveyor belt begins to deviate during operation?
If the conveyor belt deviates from its intended path, corrective measures should be taken promptly. Belt deviation can cause uneven wear, edge damage, and material spillage. Adjusting the idler alignment, tension, or loading position are common corrective actions.
Q How should local damage on a conveyor belt be handled?
When a local part of the conveyor belt is damaged, it should be repaired promptly using artificial cotton or appropriate repair materials. Timely repair prevents the damage from spreading and extends the overall service life of the belt, reducing downtime and replacement costs.